PS Screen Ink (2-Pack Ink for Metal & Glass)

Teikoku PS Ink is a 2-pack solvent type ink with superior adhesion to metal, glass, ceramics, and some plastics.

♦ Aluminum, brass and other metals, glass and treated PP & PE.

♦ Super high gloss finish
♦ Sharp images available with superior printability
♦ Excellent adhesion to metal and glass
♦ Good resistance to acid and alkaline substances
♦ Can be used as a solder resist with superior heat resistance
♦ Can be dried either with heat or without

♦ Stir well before every use.
♦ Use C-002 (Standard) thinner with 15-30% dilution for standard applications. C-001 (Fast dry), C-003 (Slow dry), C-004 (Extra slow dry) are also available with same dilution ratio.
♦ Avoid excessive thinning and avoid using other solvents as this may cause blocking and lack of adhesion .
♦ Catalyst:
Add 2 parts PS Catalyst to 10 parts* of PS Color ink and mix well
Add 1 part PS Catalyst to 3 parts* of PS Medium ink and mix well
♦ Matte finish is also available with PS Matte Catalyst.
Add 4 parts PS Matte Catalyst to 10 parts* PS Color ink and mix well
Add 2 parts PS Matte Catalyst to 3 parts* PS Medium ink and mix well
♦ Pot life is 8 hours; mix only quantity needed.
♦ "Screen Cleaner N" or C-002 Thinner is recommended to clean the stencil.
*Weight before thinning

♦ 150-300 monofilament mesh is recommended as stencil. Coverage is 20-25 m²/kg with 250 mesh.
♦ Tack free drying time at room temperature is 1-2 hours. Complete drying requires 30 minutes at 80°C or 15 minutes at 120°C. It takes several days to get full resistance if dried at room temperature.

Flammable. Flash point is 66-68°C UN Class: Not applied. UN No.: Not applied.
Use safety gloves and eyeglasses to protect skin and eyes. If the ink or coating contacts the skin, wash with plenty of water and soap. In case of contact with the eyes, wash with plenty of water and consult with a doctor. Containers should be tightly closed immediately after use, and stored in a cool, dark place. MSDS is available. Please ask for a copy, and read it carefully before handling materials. Please follow the instructions.

♦ Adhesion testing must be done at your site with actual substrate before commercial run. There may be a difference between substrates of different manufacturers or even different batches of substrate from the same supplier.

000 Medium	221 Yellow	577 Opaque Orange	791 Green
002 Extender	230 Light Yellow	581 Magenta	821 Violet
161 Scarlet	263 Reddish Yellow	611 White	871 Brown
171 Crimson	271 Opaque Light Yellow	611b White(B)	911 Black
177 Opaque Red	277 Opaque Reddish yellow	611c Opaque White	911b Black (B)
182 Brilliant Red	391 Blue

PS Catalyst:	For Gloss finish, add 2 parts to 10 parts of color ink or add 1 part to 3 parts of medium ink.
PS Matte Catalyst:	For matte finish, add 4 parts to 10 parts of color ink or add 2 parts to 3 parts of medium ink.
PS-G Catalyst & PS-G Reinforcer:	Combining PS-G Catalyst with PS-G glass reinforcer, when printing on tempered glass, is recommended to improve the adhesion. Mixing ratios are as follows. PS ink: PS-G Catalyst: PS-G glass reinforcer = 100:30:3 Pot life is about 3 hours. Drying should be done for 30 minutes at 130 °C.
PS Reinforcer:	Adhesion to glass can be improved by adding of 1-2%.
PS-M Catalyst:	Provides slow reaction when mixed with catalyst, add 3 parts of PSM Catalyst to 10 Parts of PS Catalyst and mix well. For medium ink add 1.5 parts to 3 parts of medium ink

NOTE.

Ink: PS 611 White, Catalyst: PS Catalyst, Substrate: Aluminum plate, Drying: 30 min. at 80°C, Test was done after leaving objects for one day. These test results are only for our lab purposes. We do not guarantee the results.