MRX-HF Screen Ink (Halogen Free Ink for Hard Coated Plastic)

MRX-HF Ink is Halogen free ink designed for hard coated plastic surface, which is widely used such as cover plate of cellular phones, handheld games and display panel. This ink is thermal-cured two-pack ink. It has excellent adhesion onto hard-coated surface and good post-processing properties such as cutting. Ink does not contain benzene, toluene and isophoron, and therefore it is environmentally friendly.

• Hard coated plastics of cellular phones, handheld games and display panel.
• Hard coated PMMA, Hard coated Polycarbonate.

• Halogen free(Cl ≦900ppm, Br ≦900ppm, Cl+Br ≦1500ppm)
• Does not contain benzene, toluene and isophorone.
• Has excellent adhesion onto hard-coated plastic films.
• Excellent suitability to post-processing, such as cutting.

• Mix the ink can well before every use.
  

  Ink	Catalyst	Thinner
  MRX-HF Ink	210 CATALYST**	Z-004 SOLVENT *
  100.0g	5.0g	5.0-15.0g

  *G Solvent series are also available.
  (Drying Speed G-001 SOLVENT > G-002 SOLVENT > G-003 SOLVENT > Z-004 SOLVENT)
  **106 CATALYST 10% is also available. 106 CATALYST is fast-cure type catalyst, but has shorter pot-life(1-3 hours)

• Pot-life of 210 CATALYST is 3-8 hours and it depend on the color.
• After the pot-life, ink will gelled. Please adjust only the amount of use.
• Do not use other solvent or it may occur bad effect to adhesion, curing and printing stability.
• Screen Cleaner N, G-002 SOLVENT is suitable for cleaning.
• Do not use Z-004 SOLVENT for cleaning.

• ·200-300 Mesh Screen is recommended.
• Coverage with 250 Mesh is about 35-40m²/kg by Black and 30-35 m²/kg by White.

• 80 Degree C 30minutes or 60 Degree C 60 minutes are recommended. In multi-layer printing, cure each layer by 60-80 Degree C 10 minutes for tack-free. Then cure by 80 Degree C 30 minutes or 60 Degree 60 minutes after final layer.

• SM40 DEFOAMER : Add up to 2% when foaming or repelling appears.

• Functional inks, metallic inks and Pearl inks are available by request.

• Resistance test must be done at your site with actual conditions.
• Use the designated solvent and additive. If not, halogenated compound may get mixed. Also confirm the halogen of Squeezee rubber, emulsion, cleaning solvent and printing substrate.
• Shelf Life: 24 Months after manufacturing by unopened container

• Use safety gloves and eyeglasses to protect skin and eyes. If the ink or paint contacts the skin, wash with plenty of water and soap. In case of contact with the eyes, wash with plenty of water and consult with a doctor.
• Containers should be tightly closed immediately after use, and stored in a dark and cool place.
• SDS is available. Please ask for a copy, and read it carefully before handling materials.

• Ink: MRX-HF919 BLACK, Z-004 SOLVENT 15%, 210CATALYST 5%,
• Drying Condition: 80℃ 30min, Substrate: Mitsubishi Chemical MR-200  Printing Mesh: 250 Mesh,
• Figures in above table are test result. We do not guarantee the results.